Direction for use

For best results, avoid direct sunlight, high humidityor windy conditions.

Always disconnect power before applying.

Stir well before using.

Make sure surfaces are clean and dry.


Apply liquid tape to connection or repair area.

Allow 10 minutes minimum between coats. A minimum of two coats is recommended.

Allow 4 hours minimum dry time before use.

Allow Liquid Electrical Tape to dry completely beforerestoring power.


Underground wiring

Outdoor lighting fixtures

Bilge pumps

Terminal blocks

Where to BUY

Exposed wires

physical properties of material

Chemical Type Proprietary compound

Appearance Black Silicon liquid

Specific Gravity 0.97

Flash Point, SCC C (F) 16 (60)

Temperature Range F(C) -65 to 400 (-54 to 204)

Dielectric Strength, ASTM


D-149 1117 volts/mil (6.3 mil-thickness)


Products shall be ideally stored in a cool, dry location
in unopened containers at a temperature between
8 C and 28C